Operation Manual

802.11g Wireless Router User’s Manual
29
Session Event Log
Click Session Event Log to launch the Session Event Log Table window. In this screen, you can view
session event entries. The Session Event Log Table shows Index number, Transport Type, Source IP,
Source Port, Destination IP, Destination Port, and Terminate Reason.
Click Refresh to see the latest data.
Block Event Log
Click Block Event Log to launch the Block Event Log Table window. In this screen, you can view
blocking event entries. The Block Event Log Table shows Index number, Transport Type, Source IP,
Source Port, Destination IP, Destination Port, and Termination Reason.
Click
Refresh
to see the latest data.
Intrusion Event Log
Click Intrusion Event Log to launch the Intrusion Event Log Table window. In this screen, you can view
intrusion event entries. The Intrusion Event Log Table shows Index number, Record Time, and
Intrusion Type
.
Click Refresh to see the latest data.
Wireless Event Log
Click Wireless Event Log to launch the Wireless Event Log Table window. In this screen, you can view
wireless event entries. The Wireless Event Log Table shows Index number, Time, Severity, and
Description.
Click Refresh to see the latest data.
System - Reset System
In the event that the Router stops responding correctly or in some way stops functioning, you can perform a
reset. Your settings will not be changed. To perform the reset, click on the "Reset" button below. You will
be asked to confirm your decision. The reset will be complete when the power light stops blinking.
WA N Setti n g