Operation Manual

802.11g Wireless Router User’s Manual
23
There are two methods for creating WEP encryption keys:
- Automatically. Enter a word or group of printable characters in the Passphrase box and click the
Generate button. These characters are case sensitive.
- Manually. There are two different key formats, Alphanumeric (also called ASCII) and
Hexadecimal. For 64-bit WEP, enter 5 characters in Alphanumeric format, or 10 digits (any
combination of 0-9, a-f, or A-F) in Hexadecimal format. For 128-bit WEP, enter 13 characters in
Alphanumeric format, or 26 digits (any combination of 0-9, a-f, or A-F) in Hexadecimal format.
- Default TX Key. Select which WEP Key (1~4) will be used when the Router sends data. Make
sure the receiving device is using the same key.

Wireless Access Control. Click on button to set the authorized MAC addresses list. Only the devices
on the Wireless Control List will be allowed to wirelessly connect to the wireless router.