Operation Manual

20319251xx_ka_a0
This Guide describes the main operating
sequences. For more detailed information
please refer to the detailed Cordless III User
Guide.
After pressing the menu key below "Pm"
you have the following choice:
Main menu in standby state
Answer. machine (Swatch Cordless III
Answer only)
Call register (if supported by provider)
Key lock
Ringer On/Off
Handset settings
BaseStat. setting
Service function
Charges
Provider services
Voice dialling
Logging the handset on the
Cordless III base
1. On the base station keep
i
pressed
until the key flashes.
2. In the menu of the handset under
"BaseStat. setting" – "Log on" –
"On base station" prepare the
handset for log on.
GAP uses
Your telephone supports the multi-vendor
DECT GAP protocol. To be able to log it
onto another base station, the latter must
support the GAP protocol.
Among others the following functions are
available:
• Outgoing calls from the handset
• Taking incoming calls
• Internal calls from handset to handset
Logging the handset onto another
base station
1. Prepare the other base station.
2. In the menu of the handset under
"BaseStat. setting" – "Log on" –
"On other system" prepare the
handset for log on.
3. Enter the 4-8 digit access code (AC) of
the previously prepared base station
(e.g. 12345).
4. Key in the designation of the base
station (A–D).
5. Press YES.
Setting the language
1. Press Pm.
2. Select "Handset settings".
3. Press OK.
4. Select "Language".
5. Press OK.
6. V, v Select the desired language.
7. Press X .
Menu guidance changes to the
new language.
Selecting the battery type
1. Press Pm.
2. Select "Handset settings".
3. Press OK.
4. Select "Battery type".
5. Press OK.
6. Select "NiMH" or "NiCd".
7. Press X.
Menu in the communication state
Volume (hands-free operation only)
Loudspeaker (Swatch Cordless III
Answer only)
Provider services
Handset volume
Send DTMF/keypad
Directory
Recording on/off (Swatch Cordless III
Answer only)
Listening 2nd Handset
QUICK REFERENCE USER GUIDE
2