Operation Manual

QUICK REFERENCE GUIDE
This Guide contains only the main operating functions. For more
detailed information please refer to the Operating Instructions for
the Swatch Cordless II Base.
Register the handset to the Swatch Cordless II Base
Keep pressing
˜
on the base for 5 seconds, then press
‚
twice.
901
, then key in the system PIN if required.
1
…
6
for internal call numbers, then the designation of the
base station A =
2
, B =
5
, C =
8
, or D =
0
, followed by
‚
.
Registering a handset to the first generation of the Swatch
Cordless base station (GAP)
Press the paging key on the base station for approx. 10 seconds,
until you hear the registration tone.
Press
‚
twice, key in
902
, then dial the base station
number (e.g. digit 2, 5, 8 or 0). Next, key in the four-digit system
PIN for the base station (e.g. 0000, default setting), followed
by
‚
.
The base station automatically assigns the next available internal
number for the handset. If registration is successful, the letter A,
B, C or D appears on the display, depending on the base station
number previously selected.
Disconnecting the handset from the base station
Press
‚
twice,
900
then
1
…
6
Internal call number, then
‚
.
Taking a call
fl
Answering a call.
fl
Ending a call.
Dialling out external call
fl
enter number, external conversation
or block dialling: Enter number,
fl
.
Internal call
Ë
enter internal number, internal call.
Redial
Press
ˆ
once or several times, followed by
fl
.
Saving abbreviated dialling numbers
‚Ù
storage number (00…19)
fi
, followed by call number
fi
and
‚
.
Retrieving abbreviated dialling
Ù
storage number (00…19) or press
Ù
repeatedly until
required abbreviated dialling number appears, then
fl
.