SDS

Product Name: EXXSOL™ D60(S) FLUID
Revision Date: 18 Dec 2015
Page 8 of 17
______________________________________________________________________________________________________________________
EXPOSURE LIMIT VALUES
Exposure limits/standards (Note: Exposure limits are not additive)
Substance Name
Form
Limit/Standard
Note
Source
Year
NAPHTHA (PETROLEUM),
HYDROTREATED HEAVY
Vapour.
RCP -
TWA
1200 mg/m3
171 ppm
Total
Hydrocarb
ons
ExxonMobil
2009
NOTE: Limits/standards shown for guidance only. Follow applicable regulations.
ENGINEERING CONTROLS
The level of protection and types of controls necessary will vary depending upon potential exposure conditions.
Control measures to consider:
Adequate ventilation should be provided so that exposure limits are not exceeded. Use
explosion-proof ventilation equipment.
PERSONAL PROTECTION
Personal protective equipment selections vary based on potential exposure conditions such as applications,
handling practices, concentration and ventilation. Information on the selection of protective equipment for use
with this material, as provided below, is based upon intended, normal usage.
Respiratory Protection: If engineering controls do not maintain airborne contaminant concentrations at a level
which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection,
use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of respirators
to be considered for this material include:
Half-face filter respirator Type A filter material.