SDS

Product Name: EXXSOL™ D60(S) FLUID
Revision Date: 18 Dec 2015
Page 7 of 17
______________________________________________________________________________________________________________________
may not eliminate the hazard from static accumulation. Consult local applicable standards for guidance.
Additional references include American Petroleum Institute 2003 (Protection Against Ignitions Arising out of
Static, Lightning and Stray Currents) or National Fire Protection Agency 77 (Recommended Practice on Static
Electricity) or CENELEC CLC/TR 50404 (Electrostatics - Code of practice for the avoidance of hazards due to
static electricity).
Loading/Unloading Temperature: [Ambient]
Transport Temperature: [Ambient]
Transport Pressure: [Ambient]
Static Accumulator: This material is a static accumulator. A liquid is typically considered a nonconductive,
static accumulator if its conductivity is below 100 pS/m (100x10E-12 Siemens per meter) and is considered a
semiconductive, static accumulator if its conductivity is below 10,000 pS/m. Whether a liquid is nonconductive
or semiconductive, the precautions are the same. A number of factors, for example liquid temperature,
presence of contaminants, anti-static additives and filtration can greatly influence the conductivity of a liquid.
STORAGE
The container choice, for example storage vessel, may effect static accumulation and dissipation. Keep
container closed. Handle containers with care. Open slowly in order to control possible pressure release.
Store in a cool, well-ventilated area. Storage containers should be earthed and bonded. Fixed storage
containers, transfer containers and associated equipment should be grounded and bonded to prevent
accumulation of static charge.
Storage Temperature: [Ambient]
Storage Pressure: [Ambient]
Suitable Containers/Packing: Tank Trucks; Railcars; Barges; Drums
Suitable Materials and Coatings (Chemical Compatibility): Teflon; Polypropylene; Polyethylene; Stainless
Steel; Carbon Steel; Polyester
Unsuitable Materials and Coatings: Ethylene-proplyene-diene monomer (EPDM); Natural Rubber;
Polystyrene; Butyl Rubber
SECTION 8
EXPOSURE CONTROLS / PERSONAL PROTECTION