User Manual

Let's learn how to use your OutbackCam.

Turning on the OutbackCam for the first time

• Set the ON/OFF switch to ON. The status light blinks five

times to indicate the OutbackCam is ready to monitor and

capture motion triggered events.

• The LCD screen only turns on when the OutbackCam is in

preview mode. Press the OK button to go into preview mode.

The status light illuminates to indicate the OutbackCam is in

preview mode.

Preview mode

• When you first enter preview mode, the screen momentarily

displays information about the capacity and amount of

available storage on your SD card.

• You can access the menu to configure OutbackCam

settings, browse and review captured photos and videos via

the playback screen, and take quick snapshots or videos

manually.

• To exit preview mode and start monitoring immediately,

press the OK button for 5 seconds.

• The OutbackCam automatically exits preview mode if there

is no button press for 60 seconds (except when the menu is

displayed).

• If a recording is in progress, you have to wait until the

OutbackCam has stopped recording before you can enter

preview mode.

Basics