User Manual

6
Enclosed in an integrated cradle, the Battery Pack provides
your OutbackCam the extra juice to help it stay powered for
even longer - great for long-term observations in the field.
Install batteries
1. Release the latch on the sides of the Battery Pack, and then
gently separate the battery pack from the OutbackCam.
2. Open the battery cover, and then insert four fresh "AA"
alkaline or lithium batteries into the battery compartment
by following the polarity (+ and -) markings shown inside.
3. Close the battery compartment cover.
4. Reattach the Battery Pack to the OutbackCam via the
connector socket, and then engage and lock side latches to
secure them together.
The included mounting strap allows you to the strap the
OutbackCam to a tree or timber post.
• Simply thread the strap through the slots on the back of
the Battery Pack cradle, then around a suitable object
like a tree, and through the strap buckle. Pull the strap to
tighten.
Battery Pack
Mounting Strap
Threading the strap through the buckle correctly