User Manual

30
Adjust the camera's settings such as the video stream quality, image flip, image mirror, microphone volume,
and speaker volume. See "Camera Settings - Alert Indoor Camera" on page 31.
Adjust the camera's detection sensitivity settings for motion detection, human detection, and sound
detection. See "Motion Settings - Alert Indoor Camera" on page 32.
Access up to the last 2 days of event clips (space permitting) stored on the camera’s internal memory. When
the camera's internal memory is full, the oldest clips will be overwritten.
Note: You can also clear the camera's internal memory completely permanently deleting all local recordings.
To do this, scroll all the way to the bottom of the Storage screen and tap the Format storage button.
Check for camera firmware updates. Updated firmware may from time to time be available for your camera.
These updates improve the performance, security, and functionality of your camera.
Perform general maintenance such as rebooting the camera, restoring default settings, and factory reset.
Note: Factory resetting your camera is usually only necessary for troubleshooting. It isn’t something to do
lightly as it will format the internal memory, wipe the current Wi-Fi information, and return all of the camera
settings to factory default.
View technical information about the camera such as the model name, firmware version, MAC address, and
Wi-Fi IP address.
Tap to remove (unpair) the camera from your Swann Security account. In some cases, you might need to
unpair your camera. For example, if you want to use your camera with a different Swann Security account or
if you give away your camera to a family member, you need to unpair first. Please note that once the camera
is unpaired, all event clips related to the camera will no longer be available in the app.
8
9
10
11
12
6
7
Device Settings Overview - Alert Indoor Camera
6
7
8
9
10
11
12
12