Use and Care Manual
Table Of Contents
- Contents
- Getting Started
- About the App Interface
- Navigation Bar
- Live View - CCTV System
- Live View - Alert Indoor Camera/Spotlight Outdoor Camera
- Playback
- Notifications
- Menu
- Profile
- Settings Overview - CCTV System
- Settings Overview - Alert Indoor Camera
- Camera Settings - Alert Indoor Camera
- Motion Settings - Alert Indoor Camera
- Settings Overview - Spotlight Outdoor Camera
- Camera Settings - Spotlight Outdoor Camera
- Motion Settings - Spotlight Outdoor Camera
- Appendix
9
Pairing Devices - CCTV System
Enter the password of your CCTV system which is
the same password you use to unlock the system
menu locally. This is normally the password that
you created when setting up your DVR or NVR for
the first time using the integrated Startup Wizard.
NOTE Toggle
to make sure that you have
entered the password correctly.
Once pairing is complete, tap the Done button.
The camera channels associated with your CCTV
system will be displayed on the Live View tab.
NOTE
• Depending on the internet connection, it may take
a few moments for live feed from all of the camera
channels on your CCTV system to start streaming.
• For more information about the Live View display,
see "Live View - CCTV System" on page 20.
Tap Save at the top of the screen. The app will
establish a connection with your CCTV system and
register it to your Swann Security account.