Use and Care Manual

8
Pairing Devices - CCTV System
Before you start the pairing process, make sure
your CCTV system is powered and connected to
the internet modem/router. Tap the Start button to
proceed.
NOTE
If you need information on how to power and
connect your device to the internet, refer to the
quick start guides that came with your device.
Scan the CCTV system's QR code. The QR code's
location is generally found on the top of the device.
NOTE
• If your phone can’t scan the QR code, tap the
Manual Pair button at the bottom of the QR
code scanning screen. You can type in the
device's ID located below the QR code which
looks something like this:
(Continued on the next page)