Use and Care Manual

Adjust the quality of the live video stream. If you find that the camera is taking awhile to start streaming

(i.e., spinning wheel), this may be caused by the slow internet speed on your phone (poor cellular coverage)

or limited home internet bandwidth (other video streaming activity running at the same time on your Wi-Fi

network can result in congestion affecting your internet upload and download speeds). Try using the Low

setting which may help improve loading times and provide smoother video streaming. The Low setting can

also help limit data consumption on your mobile device.

Note: This setting does not affect the video quality of motion and sound detection recordings as they are

always captured in highest resolution.

Select the environment where your camera is physically located. This enables your camera to match with the

electrical frequency of the environment and help prevent video flickering caused by fluorescent lights. The

default setting is Auto.

Lets you horizontally reverse the orientation of the camera's video display.

Adjust the camera's microphone volume. You can also turn the camera's microphone off by sliding the level

all the way to the left. Please note that decreasing the microphone volume level will also reduce the sound

detection sensitivity.

Adjust the camera's speaker volume. You can also turn the camera's speaker off by sliding the level all the

way to the left. Please note that decreasing the speaker volume level will also reduce the volume of the built-

in siren.

Apply any changes you've made to the settings.

Lets you turn the camera's video display upside down. This is useful if your camera has been mounted upside

down.

Camera Settings - Alert Indoor Camera