Use and Care Manual

Pairing Devices - Alert Indoor Camera

Tap the Start button to allow the app to

automatically connect to the camera's hotspot (e.g.,

Swann-SWIFI-xxxxxx) and pair your camera to your

home Wi-Fi as well as link to your Swann Security

account.

NOTE

If, for any reason, the app fails to connect

automatically to the camera's hotspot, you can

manually connect to the camera's hotspot:

Go to the Wi-Fi settings on your phone and connect

to the camera's hotspot (e.g., Swann-SWIFI-xxxxxx).

Then, return to the app and tap the Retry button to

continue setup.

Once pairing is complete, tap the Done button.

Your camera will be displayed on the Live View tab.

NOTE

• Depending on the internet connection, it may

take a few moments for your camera's live

video to start streaming.

• To learn about the Live View display, see

"Live View - Alert Indoor Camera/Spotlight

Outdoor Camera" on page 22.

• As the camera completes initialization for the

first time, you will receive push notifications

that the device has been restarted and the

device is online.

• You can check on the status of your camera,

change the camera name, and adjust various

camera settings such as the timezone and

motion detection via the Settings tab. For more

information, see "Camera Settings - Alert

Indoor Camera" on page 31.