Firmware, Drivers & Software

Pairing Devices - Spotlight Outdoor Camera

Before you start the pairing process, make sure

your camera is powered. If you need information on

how to power your camera, refer to the quick start

guide that came with it.

At this point, you should also make sure that your

phone is connected to a 2.4GHz Wi-Fi network and

you have the Wi-Fi network password handy.

Tap the Start button to proceed.

Scan the camera's QR code. The QR code's location

is generally found on the base of the device.

NOTE

• If your phone can’t scan the QR code, tap the

Manual Pair button at the bottom of the QR

code scanning screen. You can type in the

camera's ID (consists of 12 alphanumeric

characters) located on a sticker label which

looks something like this:

(Continued on the next page)