Full Product Manual
Table Of Contents
- Important Information
- Password Recovery
- Live View
- Live View Mode
- Live View Icons & Controls
- Main Menu
- Menu Layout
- Camera Configuration
- Display: Live
- Display: Privacy Zone
- Enabling a Privacy Mask
- Record: Mainstream
- Record: Substream
- Alarm: Detection
- Alarm: Detection - Actions
- Motion Detection Setup
- Motion Detection Tips
- Thermal-Sensing Camera Tips
- Alarm: Deterrent
- Spotlight Detection Setup
- Spotlight Trigger Schedule
- Device: PTZ
- Recording Configuration
- Record: Record
- Alarm: Detection
- Capture: Capture
- Capture: Schedule
- System Configuration
- Display: Display Configuration
- Network: Network
- Network: Email Configuration
- Network: Email Schedule
- Network: DDNS
- Network: IP Filter
- Network: Date and Time
- Device: HDD
- Device: S.M.A.R.T
- Device: Cloud Storage
- System: General
- System: Users
- Advanced: Maintain
- Advanced: Events
- Advanced: Auto Upgrade
- System Status
- System: Info
- System: Channel Information
- System: Record Info
- System: Network State
- Glossary
- Warranty Information
35
Click for contents
Display: Display Configuration
Sequence Mode: Select how many video channels you would like to display
when your DVR is in sequence mode. You can select from one, four or six
cameras to display at a time.
Sequence Dwell Time: Enter in seconds the maximum length of time you
would like to display a video channel in sequence mode before displaying the
next video channel (300 seconds is the maximum).
VGA/HDMI Resolution: Select a display resolution that is suitable for your TV.
Transparency: Click and hold the slider left or right to change how transpar-
ent the Menu Bar and Main Menu will appear on-screen. Adjust accordingly.
Enable Overscan: Is mainly used on older television sets to display the entire
viewable area correctly on-screen. It does this by cutting off the edges of the
picture. This is not required for modern Plasma and LCD TVs as the image is
digitally processed to display the correct aspect ratio.
→ Click “Default” to revert to default settings.
→ Click “Apply” to save settings.