User Manual

AT A GLANCE

Delay button

Sensor

Magnet

Alignment

arrows

Sensor

Switch

Status LED

Siren

AT A GLANCE

Getting to know your Gate Sensor

Thank you for choosing the Gate Alert Kit from Swann. It's the ideal

system to detect unwanted access into a restricted area through the

gate or door.

How does it work?

Basically, there are two parts to the Gate Alert Kit.

1. The Indoor Alarm Receiver works as an alarm buzzer. It monitors

for signals coming from the Gate Sensor, and activates the alarm

and channel LED indicator in response to that signal.

2. The Gate Sensor consists of a wired switch and a magnet which

help safeguard a gate or door from being opened without your

knowledge. If the Delay button is not pressed and the gate or door

is opened, the Gate Sensor sounds its built-in siren immediately

and sends a signal to the Indoor Alarm Receiver.

Tips

The Gate Sensor comes paired out of the box to sensor channel 1 on

the Indoor Alarm Receiver.

You can easily pair the Gate Sensor to a different sensor channel at any

time, if necessary. See "Re-pairing your Gate Sensor" on page 7.