Installation Instructions

10
OPERATING BASICS
Adjusting the receiver volume
You can change the loudness of the Indoor Alarm Receiver using
the Volume button on the back of the receiver. Three volume
levels are available: High, Medium and Low. The approximate
sound level of each volume setting is shown below.
Volume Setting Sound Level Example
High (default) 85 dB Lawn mower, Electric drill
Medium 78 dB Busy city traffic, Alarm clock
Low 70 dB Vacuum cleaner, Phone ringtone
Silent mode
Like some peace and quiet for a period of time? You can put the
alarm triggered by the Alert Sensor on “silent”. Simply press the
Sensor Channel button that corresponds with the Alert Sensor
that you want the alarm muted. The Indoor Alarm Receiver
beeps twice, confirming the alarm has been turned off.
If the Alert Sensor detects movement while the alarm is
muted , you will still be visually alerted by the corresponding
Sensor Channel LED indicator blinking on the receiver.
To unmute the alarm, press the corresponding Sensor
Channel button again. You will hear a single confirmation
beep from the receiver.
Low battery warning
Your devices will notify you when battery power is running low.
• Install new batteries immediately for the receiver when all
four LED indicators start blinking at the same time.
• Install new batteries immediately for the Alert Sensor
when its status LED starts blinking continuously.
OPERATING BASICS