Download

30
Changing the Wi-Fi Network on the Camera
As you've already enabled pairing mode on
your camera earlier (make sure that the LED is
blinking blue slowly), simply tap Next.
If you haven't done so, enable pairing mode on
your camera now, then tap Next.
Enter the password of the Wi-Fi network shown
above ("HomeCentral24G" in this case), then
tap Connect. Wi-Fi network passwords are
case sensitive, so make sure to enter it exactly
the same as it was created or as found on your
router. You can tap
to show the password
you've entered and conrm it is correct.
The Wi-Fi network shown is the network your
smartphone is currently using and will be the
one your camera joins. If this is not the preferred
network, tap
and follow the on-screen
instructions to choose another Wi-Fi network.
Connect your smartphone to the camera's
temporary Wi-Fi network named “SwannCam_
XX_XX” via your smartphone's Wi-Fi settings,
then return to the app and tap Next.
(Continued on the next page)