Specifications

3
Technical Specifications
Video
Image Sensor 1/3” Sony ‘Effio’ CCD
Video Quality 700 TV Lines
Effective Pixels NTSC: 976 x 494
PAL: 976 x 582
Min. Illumination 0 Lux (IR on)
White Balance Automatic
Electronic Shutter NTSC: 1/60 ~ 1/100 000
PAL: 1/50 ~ 1/100 000
Gain Control Automatic
Backlight Comp. Yes
Wide Dynamic Range Yes
Lens 3.6mm
Viewing Angle Avg: 75° (H: 80°, V: 70°)
Night Vision
Range Up to 30m (100ft)
IR Cut Filter No
Number of IR LEDs 24
Infrared Wavelength 850nm
IR LED Life (Average) 10, 000 hours
General
Operating Power DC 12V @ 300mA
Operating Temp. -20°C ~ 45°C (-4°F ~ 113°F)
Casing Aluminium
Dimensions 165mm x 115mm x 67mm
(6.5” x 4.5” x 3.15”)
Weight 465g / 17.5oz (approx)
Tips & Tricks
• Try to aim the camera at an area which is evenly lit. Objects or people in shadows near brightly lit objects are
very hard to see. It’s better to have the camera in the shade looking into the light than vice-versa.
• When running your cable, try to avoid bending it at sharp angles.
• Don’t put your cable near live electrical wiring. AC electricity generates radio “noise” which can
interfere with the signal from your camera.
Connection Guide and Specifications
INPUT
2A. Connecting Directly to TV 2B. Connecting to Your Existing DVR
Connect a BNC to RCA
adapter and connect to video
input on your TV or VCR
2
Connect the BNC extension
cable to an open channel on
the back of the DVR
2
Plug in the camera
power adapter into
a wall socket
4
Connect the camera’s DC
and BNC socket cable to the
extension cable’s DC and BNC plugs
1
Connect the extension cables
DC socket to the DC plug on
the power adapter
3
The green plug is used to connect the OSD (on-screen display)
controller. This is an advanced feature, and recommended only
for experienced users. To access a comprehensive guide for the
advanced features of this camera, log onto our website at:
www.swann.com/osdpro