Product Manual

45
Click for contents
Display: Output
Video Output: This option cannot be changed.
SEQ Mode: Select how many video channels you would like to display when
your DVR is in sequence mode. You can select from one, four or six cameras
to display at a time.
SEQ Dwell Time: Enter in seconds the maximum length of time you would
like to display a video channel in sequence mode before displaying the next
video channel (300 seconds is the maximum).
VGA/HDMI Resolution: Select a display resolution that is suitable for your
TV. 1920 x 1080 will suit most TVs. If you have a 4K capable TV, you can select
either 2K (2560 x 1440) or 4K (3840 x 2160) to take advantage of the higher
resolution that your TV provides (the 4 channel model supports a maximum
display resolution of 1920 x 1080 only).
Transparency: Click and hold the slider left or right to change how transpar-
ent the Menu Bar and Main Menu will appear on-screen. Adjust accordingly.
Support Overscan: Is mainly used on older television sets to display the en-
tire viewable area correctly on-screen. It does this by cutting off the edges
of the picture. This is not required for modern Plasma and LCD TVs as the
image is digitally processed to display the correct aspect ratio.
· Don’t forget to click “Save”
to apply settings.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.