Product Manual

19
Click for contents
Alarm: Motion
Channel: Select a camera that you would like to edit.
Detection: By default, your DVR will record motion only if one or more objects
have been detected by the camera and the camera’s built-in PIR sensor. This
provides more accurate motion detection by eliminating false triggers due to
wind, leaves falling and rain (see page 23 - Thermal-Sensing Camera Tips).
If you’re monitoring an area that doesn’t require objects to be detected by the
camera’s built-in PIR sensor, such as a busy walkway or a building entrance,
change this to “Motion”.
Buzzer: When motion has been detected, you can enable the DVR’s buzzer to
alert you for a predetermined amount of time.
Sensitivity: This option allows you to change the sensitivity level. The higher
the number, the more sensitive your DVR will be when detecting motion. For
most instances, the default selection will be suitable, however it’s recom-
mended to conduct a test to see if the sensitivity level is correct for the cam-
era’s location (see page 22 - Motion Detection Tips).
Area: Click the “Setup” button to change the default motion detection area.
The entire view of the camera is enabled for motion detection, however you
can select certain areas if you wish (see page 21 - Motion Detection Setup).
Post Recording: This option instructs your DVR to record for a set period of
time after an event has occurred. For most instances, the default selection
will be suitable, however you can change this if you wish.
Show Message: When motion has been detected, the motion icon will appear
on-screen. Click the checkbox if you want to disable this.
(continued on next page)
When motion has been de-
tected by one or more cam-
eras, your DVR will alert you
to a potential threat at your
home. It does this by send-
ing you an email alert with
an attached image from the
camera to use as a reference
(if this option is enabled) and/
or sending push notifications
via the HomeSafe View app.
· Don’t forget to click “Save”
to apply settings.
· Use the “Copy” function to
apply all settings to the other
cameras.
· Click the “Default” button to
revert back to default settings.
· Click the “Close” button to
exit the Main Menu.