READ ME FIRST DIY ALERT RANGE Garage Parking Sensor EN Instruction Manual
AT A GLANCE Thank you for purchasing the Garage Parking Sensor from Swann. Follow the instructions in this guide to get started. Retractable Cable Extends the Display Light to a height clearly visible from the driver's seat. Display Light Detection Zone Slowdown Zone Stop Zone Ultrasonic Sensor Bounces soundwaves off your car to measure the distance. (Flashing) Low Battery INSTALLING BATTERIES 2 1 Open the battery cover on the rear of the Sensor. 2 Insert 4 AA batteries (not included).
MOUNTING THE GARAGE PARKING SENSOR You can use either screws to hang the Garage Parking Sensor (through the keyhole slots on the rear), or double-sided adhesive pads to stick the Garage Parking Sensor on the wall surface. Note: If you are mounting to brick or concrete wall using screws, it's recommended to also use appropriate wall plugs.
Technical Support All Countries E-mail: tech@swann.com Telephone Helpdesk USA 1800 627 2799 NEW ZEALAND 0800 479 266 AUSTRALIA 1800 788 210 UK 0808 168 9031 Limited Warranty Terms & Conditions Swann Communications warrants this product against defects in workmanship and material for a period of one (1) year from its original purchase date. You must present your receipt as proof of date of purchase for warranty validation.
