Installation Guide

ManualsBrandsSwan ManualsBath48 in. x 72 in. x 58 in. Five Piece Easy Up Adhesive Tub Wall in Bone

Installation Instructions for

High-Gloss Bathtub Wall Kits

CAUTION

Read ALL instructions carefully BEFORE

starting your installation. Save this man-

ual for future reference.

Model No. WW-6000

Designed for areas 58” to 72” wide,

29” to 48” deep

Model No. TW-32

Designed for areas 57” to 62” wide,

29” to 32” deep

INCLUDED IN CARTON:

A. One left side panel

B. One left corner panel with soap dish

C. One back panel with soap dish

D. One right corner panel with soap dish

E. One right side panel

F. One left side apron strip

G. One right side apron strip

H. Three tubes of adhesive

I. One tube of caulk

J. One roll pressure sensitive tape

INCLUDED IN CARTON:

A. One left-hand end panel

B. One right-hand end panel

C. One back panel with soap dish

D. One right-hand corner panel

E. One left-hand corner panel

F. One tube of caulk

G. Three tubes of adhesive

H. One roll pressure sensitive tape

Summary of content (4 pages)

PAGE 1
Installation Instructions for High-Gloss Bathtub Wall Kits Model No. TW-32 Designed for areas 57” to 62” wide, 29” to 32” deep B A C D H I INCLUDED IN CARTON: A. One left side panel B. One left corner panel with soap dish C. One back panel with soap dish D. One right corner panel with soap dish E. One right side panel F. One left side apron strip G. One right side apron strip H. Three tubes of adhesive I. One tube of caulk J. One roll pressure sensitive tape E J G F Model No.
PAGE 2
Bathtub Wall Panel Kits WALL SURFACE PREPARATION FOR SWANSTONE TUB WALL AND SHOWER WALL UNITS When installing over Sheetrock, Greenboard, or Wood: When installing over Tile: A. Surface must be dry, smooth, and free of any dust, soap scum or any other contaminants. Wipe wall surface with a damp cloth. Ceramic – Loose tiles must be removed. B. To ensure proper adhesion, the exiting wall surface must be clean and dry. Follow the instructions from the adhesive manufacturer regarding primers. A.
PAGE 3
Accessories WINDOW TRIM KIT Model WTK-1 (not part of TW-32 or WW-6000 TUB WALL KIT – available through your dealer) This high-gloss Window Trim Kit is designed to eliminate unsightly sills, decorate and make waterproof the left and right jambs, plus provide a waterproof-natural draining sill. READ ALL INSTALLATION INSTRUCTIONS BEFORE STARTING. TRIAL FIT PANELS PRIOR TO FINAL INSTALLATION. INSTALLATION PROCEDURE: Allow panels to adjust to room temperatures (65º to 90º) for at least 6 hours.
PAGE 4
5. Apron Strips TW-32 Only 6A. Side Panels TW-32 Only 6B. Side Panels WW-6000 Only 7. Trial fit before proceeding. If the distance from back wall to front edge of apron is more than 31-1/2", the apron strips will not line up with the side wall, and must be cut down or discarded if a straight line from floor to top of the side panel is desired. Note: Side panels for Model TW-32, A and E, are not interchangeable. Check backs for markings left and right.