Installation Guide

IMPORTANT NOTICE
IMPORTANT NOTICE: Indicates that equipment or property
damage can result if instructions are not followed.
Read and Understand the Manual
It is the responsibility of any individual who installs or
maintains this product to fully understand and follow
proper installation and maintenance procedures. Be aware of
the inherent dangers in the use of power tools when installing
this product. Read and understand all Warnings, Cautions,
and Important Notices in this manual.
Work Safely
DO NOT proceed if any doubt arises about the correct
or safe method of performing anything found in this or
other Swan Corporation manuals. The installation of this
product can require using power tools. Do not use power tools
without adequate training. If necessary, hire or consult a
trained professional for expert assistance before continuing.
Use Proper Tools
Always use proper tools which are in good, working
condition during the installation of the Swan
Corporation products. Using tools other than those listed could
adversely affect the integrity of floors, pipes, walls, or this
product and could result in water damage or other damage to
floors, pipes, walls, or other portions of your building or home.
Do Not Use Nails
The panels mount to walls with 100% clear silicone
only. The Swan Corporation recommends 100% clear
silicone sealant to mount this product. Never use hammers,
nails, or screws. Hammers, nails, and screws could adversely
affect the integrity of this product. Nails and screws could
puncture the Swan Corporation Wall Systems and Panels,
resulting in water or other damage to floors, pipes, walls, or
other portions of your building or home.
Inspect Before Cutting
Make sure no electrical wiring or plumbing is present
before cutting into a wall to install any accessories.
Wall Conditions
Inspect the walls before installing the Swan Corporation
panels. Never install panels over damp walls or an
existing mold condition.
CAUTION
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in injury. It may also be
used to alert against unsafe practices.
Use Proper Installation Methods
Follow all instructions related to wall surface
preparation. Failure to follow such instructions could
cause the panels to detach from the wall surface after
installation, resulting in personal injury. Failure to follow these
instructions could result in water damage.
800-325-7008 3 Swan
Safety Guidelines