Technical data

6
HOW TO USE
BRUSH CLEANING TOOL
Over time, the appliance’s cleaning
brushes may accumulate fine
debris such as hair, thread and
other particles. It is recommended
to clean the rotating brushes on
occasion using the included Brush
Cleaning Tool
1. Make sure the appliance is
turned off before cleaning.
2. Use the cleaning brush tool to
cut and remove tangled debris
(see Figure 7). Simply guide
the blade along the shaft of the
Rotating Cleaning Brushes.
3. Dispose of debris in garbage.
Figure 7
BATTERY DISPOSAL
The sweeper is equipped with nickel/metal hydride batteries (NIMH), the components
of which could damage the environment if not disposed properly. Please recycle
the complete handle with the integrated rechargeable battery pack. Do not discard
packaging material and used device, recycle them instead. Please contact your local
council for the nearest recycling center.
NOTE: USE ONLY REPLACEMENT BATTERIES OFFERED BY THE MANUFACTURER.
CARE AND MAINTENANCE
1. Use a dry cloth to clean the product including the dust container and remove hair
and fibers from the bristles. This is best done if the dust container is removed from
the casing so that you will have optimum access to the bristles.
2. Do not use abrasive material to clean the device and do not submerge it in water
under any circumstance.
3. Do not use the device to sweep up any liquids and do not use it on a moist surface.
4. Do not use it on cement or other rough surfaces.
5. Do not use the device to collect strings or fabric fibers.
6. Do not use the device to clean carpet fringe or frayed carpets.
NOTE : This sweeper performs best on smooth surfaces such as wood, ceramic, tiles
and marble. It will also work on short-haired carpet, but with reduced performance.
Not ideal for use on long-haired carpets.
SU4010_IM.indd 6 14/11/2013 16:30