Operation Manual



1. The lter is designed to reduce the build-up of limescale which occurs during
steam ironing to prolong the working life of your iron. However, please
note that the lter will not completely stop the natural process of limescale
build-up.
2. The lter should be replaced with a new one after 2-3 months. The iron can still
be used with a clogged lter. However, limescale will most probably be built up
in the steam chamber. This happens depending on the quality of your local
water quality. You should replace the lter as soon as possible or mix your
water with 50% distilled water.

canti-cal
1. Disconnect the appliance from the power supply and allow the
appliance to cool down for at least 60 minutes.
2. After use, slide out the water tank and pour out all of the remaining water.
3. Wind the power cord around cord storage of the base unit.
4. The iron should be placed on the iron rest plate and they can be stored
together.
1. Unplug the appliance from the mains supply and let the iron cool down.
2. Clean the iron with a damp cloth.
3. Wipe off limescale and any other deposits from the soleplate with a damp cloth
or non-abrasive (liquid) cleaner.
4. Never clean the iron under the tap.

