Operation Manual
If there is no water or not enough water in the tank, the lling indicator light on con-
trol panel will start blinking. An alarm will sound 5 BEEPs to indicate lling is needed.
1. Press the water tank lock upwards and slide the detachable water tank outwards
from the base.
2. Take the lter upwards out from the water ll hole.
(You can take the lter out of the opening for lling water into water tank,
or ll water into water tank directly with the lter already in the opening).
3. Fill the water tank up to or below the “MAX” ll line with clean tap water.
4. Replace lter back into water lling hole.
5. Replace the water tank into the base unit again. It will be locked in place with
the base when a “click” sound is heard.
6. Always pour out the remaining water after use.
Note:
When the water level in the tank falls below a certain level, the pump will
make a noise. When this happens, stop ironing and rell the tank.