Manualshelf

Use and Care Guide

ManualsBrandsSWAN ManualsBathtub Wall SurroundsBisque Fiberglass/Plastic Composite Bathtub Wall Surround (Common: 60-in x 30-in; Actual: 59.5-in x 60-in x 28.25-in)
1
The Swan Corporation ❚ One City Centre Ste. 2300 ❚ St. Louis, MO 63101 ❚ p (800)325-7008 ❚ f (314)231-8165 ❚ www.swanstone.com
57
T U B & S H OW E R
BA-3060 Veritek
®
Bath Alcove Walls
TUB ALCOVE WALLS
WARRANTY
Limited Lifetime – Residential
Limited 5-year – Commercial
Manufactured from Swanstone Veritek
®
(see page 2 for detailed information)
S P E C I F I C AT I O N S
BA-3060 Veritek
®
Bath Alcove Walls
Tub Area Ship Ship Carton
Model Part Designed To Fit Wt. Lb. UPS Dims. In. Cu. Ft.
BA-3060 BA03060 30" D x 60" W* x 59-1/2" H 75 – 62 x 63 x 7 15.40
(762 mm x 1524 mm x 1511 mm)
*1-1/2" additional area required on outer edges of wall panels to accommodate
nail-up flange.
Kit Includes: One right side panel, one left side panel, one back panel with six
factory installed wall mounting clips, and complete installation instructions.
Packaging: Each kit is packed in a flat, rectangular carton.
M A I N T E N A N C E A N D
C L E A N I N G I N F O R M AT I O N
Wash regularly with warm water; use soft
cloth with mild liquid detergent. Never use
abrasive scouring powders, cleaners or pads.
They will dull the finish. Protect finish with
any fiberglass wax or automotive paste wax.
S U P P O R T D O C U M E N T S
Installation instructions available on line at www.swanstone.com
S TA N D A R D S A N D R AT I N G S
Class B fire rating
American National Standard Institute—ANSI Z124.1.2
International Association of Plumbing and Mechanical Officials (IAPMO)—listed
cUPC listed—Certified to CSA Standard B45 by IAPMO
American Society for Testing and Materials
National Electrical Manufacturers Association
F E AT U R E S
• Nails directly to studs for fast
installation
• Sturdy interlocking system for
one-piece appearance
• Panels easily fit through existing
doorways and can be installed
by one person
• Made of Veritek with no surface
coating to chip or crack
• The BA-3060 is a 3-piece
compression molded composite
material with molded-in color
and a natural gloss surface
• White (010)
• Bone (037)
• Bisque (018)
• Bermuda Sand (040)
• Gray Granite (042)
• Tahiti Desert (050)
C O L O R S
(See pg. 139 for color sample.)
60"
59-1/2"
1-1/4"
28-1/4"
28"
13"
18-3/4"
BA-3060
Designed to fit tub area
30" deep x 60" wide* x 59-1/2" high (762 mm x 1524 mm x 1511 mm)
Shower door opening size: 58-1/16" wide at tub ledge, 58" high

Summary of content (1 pages)