Installation Instructions

u Rename or Delete SwamCam!
!
1. From the Settings page, choose
Device Information.
2. Then tap the arrow to the right of
Camera.
3. Select the camera system you
wish to Rename or Delete.
NOTE: If deleting, you will get a warning if you want to
proceed. This will delete all the components. You will
need to re-add the entire system if you delete the
camera.
!
!
u System Setup iOS…(cont.)
Please be advised that SwamCam
only supports 2.4GHz Wi-Fi network. If
you have both 2.4GHz & 5GHz Wi-Fi,
please make sure you are connecting
to the 2.4GHz Wi-Fi. The system
should automatically choose the
2.4GHz. If you are having difficulty,
please contact support.
5. Tap “Join” to continue the
connection.
6. After successfully adding the
camera, you should see the name of
the camera and the status in
parenthesis (Online) or (Offline). As
a quick test, you can tap Live View
from the opening page to see if it
works. If it was added successfully,
we can now add the remaining
components.
The next section refers to setting up an
Android phone with Swamcam. If you
are not using Android, please skip ahead
to page 11.
!
!
!
!
!
28!
5!