Installation Instructions

u Motion Settings
To access Motion Settings, tap “Settings” on the top
left of the homepage then “Motion Sensitivity”.
Motion sensitivity-The
default setting is Normal
sensitive. However, you may
adjust this for different
environments.
For example, if there is a tree
or poolside item that is in view
of the motion zone, it may
trigger an alert when the wind
blows. You can lower the
motion sensitivity to
ignore slight movements and
only focus on the larger
movements of people by
choosing “Low sensitive.” If you
would like the system to notify
you for more movement, you
may choose “High sensitive”
Motion Zone-The system provides a Detection Zone in
which it will detect human motion. Any movement detected
in the Detection Zone will trigger an alert. In addition
to the Detection Zone there is also an exclusion zone.
!
u Live View Screen…(cont.)!
End Live View.!
Mute Microphone (when un-muted you will be heard
through a speaker in the camera.) The default is muted.
Upon entering Live View, the audio from the camera
microphone is played through the phone speakers. You
may mute this by tapping the button and you will not hear
any sound from the camera.
If the Alarm is activated, you may silence the alarm on the
alarm/repeater with this button.
If you are a Premium Subscriber, you can record the
Live View screen by tapping this button to begin
recording.
! !
20!
13!