Installation Instructions

u Quiet Hours Settings
!
In order to lower the chances of a false alarm, or to set
up times where you don’t want the camera to detect for
human motion even when “Armed”, the system allows
for customized quiet hours.
Access the quiet hours in Settings> Quiet Hours
!
1. You can use “Master on” or
“Master off” to enable or disable
all the quiet hours at once.
2. You can set quiet hours for one
day or multiple days as well as
specific times of the day.
!
!
!
u Adding the Alarm/Repeater and
Keypad
!
1. Add the alarm/repeater device by
tapping Alarm from the Add devices
section.
2. Then choose the Camera device you
want to have the alarm/repeater
connected to. If you only have one
Camera, then there is only one option.
Tap the “>” arrow to continue.
.
3. Scan or input the QR code located on
the repeater. After that, the process of
adding the alarm/repeater will begin.
4. To add the keypad, choose Keypad,
then repeat the same process as
adding repeater.
!
!
!
!
!
11!
!
22!