User's Manual

• Avoid sudden turns while riding fast, as this may result in an accident.
• Do not step on the center pivot point of the zipboard.
3.3. CALIBRATION
If your SWAGBOARD Shuttle Vertical Swagboard seems to pull to the left or right during your ride, you may need to recalibrate
its sensors. The calibration process requires a flat stable surface and a level. Levels may be purchased separately at most
hardware stores or level apps may be downloaded with most smartphones.
STEP 1. Turn off the zipboard.
STEP 2. Adjust the zipboard so both pedals are level. Using a level tool is recommended for accuracy.
STEP 3. With the zipboard level, press and hold the power button for about 6 seconds, until you hear a single beep. The
lights will begin flashing.
STEP 4. Make sure the pedals are level, then press the power button again to turn the zipboard off.
STEP 5. Turn the zipboard on and try riding to check calibration.
If the Shuttle Vertical Swagboard is still not calibrated correctly, repeat step 1-5 at least twice more before calling
customer support for additional assistance.
12 SWAGTRON
®
SHUTTLE VERTICAL SWAGBOARD