User Manual

5.1 How to Ride

Assuming you have equipped suitable protective gear and that the Swagger 5 has been placed on a level surface, is charged,

and does not have any issues, follow the steps below. For your safety, please read this entire section before attempting to ride.

•Start your scooter by pressing and holding the power button for 3~5 seconds.

•Moving forward with your scooter is as easy as pressing the throttle.

•Cruising is as simple as maintaining speed for at

least 5 seconds.

•Use the bell to alert pedestrians and other riders of

your presence.

•Turn the headlight on/off by quick-pressing the

power button twice.

•Switch gears between 1, 2, and 3 by quick-pressing

the power button once. Each gear has different

speed. Gear 1’s max. is 5 mph, Gear 2’s is 10 mph,

and Gear 3’s is 18 mph.

•The display shows how much battery power is left.

•To slow down, gradually ease off the throttle and

apply pressure to the brake.

•To stop, apply full pressure to the brake until the

scooter stops completely.

1. Handles

2. Brake

3. Bell

4. Headlight

5. Display

6. Power Button

7. Throttle

8. Pairing Indicator

• When the headlight is turned on, the taillight will

also blink for increased visibility.

• Gear speeds are approximate. Actual speed

may vary due to terrain, rider weight, and/or

other factors.