User Manual

07
2.3 Display Information
The Swagger 5’s display features several different elements. Be sure you understand these before
attempting to ride. Press and hold the power button approx. 3~5 seconds to turn the scooter on/off.
1. Battery Level Indicator - This icon indicates how much battery life you have left. As power goes
down, the icon will indicate different levels.
2. Speedometer - These numbers indicate the current speed and will change when the Swagger 5 is
in use. Readings are measured in mph.
3. Pairing Status Indicator - This icon indicates pairing status. When it is not visible, this indicates
the scooter is connected to your phone. When it is visible and flashing, this indicates the scooter is
disconnected from your phone.
When the battery level is low, stop riding, turn off the scooter, and fully recharge it before
riding again.
Section 3
FOLDING & ASSEMBLY
Ensure the Swagger 5 is off before working with any of its parts. The
scooter comes mostly assembled within the package. Some minor
assembly is required before riding. All parts and tools are included.
3.1 Assembling the Handlebars
First, thread the section with the brake and bell onto the
left side of the handlebars, then use an Allen key to tighten
the screw underneath it. Next, screw the handles in. Lastly,
make sure everything is securely attached.
1
2
3