User Manual

10 SWAGTRON

SWAGSKATE NG3English

IV – HOW TO RIDE

Always wear protective gear (including helmet) when riding. Make sure the

Swagskate is placed on a level surface and fully charged. See SECTION 3.1

for charging instructions.

STEP 1. Step one foot on the front sensor area (

). Then step the

other foot on the back sensor area to release the braking

system. (The dominant foot should be on the rear sensor.)

STEP 2. Using your dominant foot (on the rear sensor), kick off the

ground to generate some speed.

STEP 3. Lean forward slightly and kick your rear foot on the

skateboard to accelerate (

), until it reaches the top speed

9.3mph (15km/h).

STEP 4. To slow down, lean back and kick your front

foot on the skateboard to help you slow

down (number 1 icon). Stand straight on

the skateboard to come to a complete stop

(Fig. 3).

+ The skateboard will automatically brake immediately

when leaving the two sensors at the same time.

+ The motor will automatically engage to maintain the

current speed

Fig. 3

Fig. 2