User Manual

Swagtron KR1 User Manual 13
Tire Inflation
You will need a pressure gauge, a standard bicycle pump to inate the KR1 scooter’s tires.
Step 1. Ensure the scooter is powered off and stable.
Step 2. Visually inspect the tires for damage, or puncture marks. If the tire is damaged, DO NOT
INFLATE IT. Contact customer service immediately.
Step 3. Find the valve located on the inside of the wheel and remove the cap.
Step 4. Use a standard scooter pump to pump air to the tires slowly.
Step 5. Use the pressure gauge periodically to check PSI.
Step 6. When the tire reaches 550 Kpa, stop inating and replace the valve cap.
Step 7. Repeat with other tire.
• AnyPSImarkingsonthetiresindicatesamaximum.DONOTinatethefronttiretothis
value. Only inate to a maximum of 550 Kpa as directed above.
• Underinationisstronglyrecommendedifyouintendtorideoutdoorsintemperaturesabove
90°F degrees. Bring the scooter indoors and reduce the tire pressure by 3-4 PSI. If the PSI
is too high and the tire are exposed to excessively high temperatures, riding outdoors may
cause serious damage to the tire including but not limited to stretching and/or rupturing.