User Manual
Table Of Contents
5.1. CHARGING INSTRUCTIONS
Charge the hoverboard before using it.
STEP 1. Make sure the hoverboard is powered off and connect the charger’s cables and adapter if needed.
STEP 2. Plug the charger into a wall outlet (100V-240V; 50-60Hz) then plug the other end into the hoverboard.
STEP 3. Allow 4 hours for charging. The battery indicator may flash during charging and stop once charging is
complete. Disconnect all cables once charging is finished.
DO NOT, under any circumstances, use the hoverboard while it is charging or connected to the charger.
The charging time is approximately 4 hours. Charging longer than that may affect battery life and/or performance.
Use only the charger provided with your T580 Warrior. If you have lost or misplaced your charger, contact customer
support to obtain a replacement. For the safety of yourself and others and to extend the battery’s life, please be
sure to follow charging instructions.
SWAGTRON
®
SWAGBOARD T580 WARRIOR HOVERBOARD 17