User Manual

• Avoid sudden turns while riding fast, as this may result in an accident.
• Do not step on the center pivot point of the SWAGBOARD T580 Warrior.
3.3. CALIBRATION
If your SWAGBOARD T580 Warrior seems to pull to the left or right during your ride, you may need to recalibrate its sensors. The
calibration process requires a flat stable surface and a level. Levels may be purchased separately at most hardware stores or level
apps may be downloaded with most smartphones.
STEP 1. Turn off the hoverboard.
STEP 2. Adjust the hoverboard so both pedals are level. Using a level tool is recommended for accuracy.
STEP 3. With the hoverboard level, press and hold the power button for about 6 seconds, until you hear a single beep.
The lights will begin flashing.
STEP 4. Make sure the pedals are level, then press the power button again to turn the hoverboard off.
STEP 5. Turn the hoverboard on and try riding to check calibration.
If the T580 Warrior is still not calibrated correctly, repeat step 1-5 at least twice more before calling customer support for
additional assistance.
14 SWAGTRON
®
SWAGBOARD T580 WARRIOR HOVERBOARD