User Manual

III. HOW TO RIDE
3.1. RIDING INSTRUCTIONS
Before riding, equip yourself with suitable protective gear. Make sure the hoverboard is placed on a level surface and fully
charged. See SECTION 5.1 for charging instructions.
STEP 1. Press the power button to turn on the
hoverboard.
STEP 2. The hoverboard will enter self-balancing
mode. Step on one pedal then quickly step
on the second pedal with your other foot.
STEP 3. Stand upright but relaxed and lean slightly
in the direction you want to go. Do not make
any sudden or jerky movements.
If the hoverboard doesn’t seem to work, make sure your feet
are centered on the pedals.
• Do not ride sideways across slopes.
• If the T580 Warrior does not start self-balancing automatically, the system indicator may light up and/or flash to
indicate an error. DO NOT operate the T580 Warrior under these conditions. Turn the hoverboard off and back on
again. If this fails to resolve the issue, re-calibrate the hoverboard by following the instructions in SECTION 3.3.
Power ButtonPedal
SWAGTRON
®
SWAGBOARD T580 WARRIOR HOVERBOARD 11