User Manual

SWAGTRON
®
SWAGBOARD T580 TWIST HOVERBOARD 9
III. HOW TO RIDE
3.1 RIDING INSTRUCTIONS
Before riding, equip yourself with suitable protective gear.
Make sure the hoverboard is placed on a level surface and fully
charged. See SECTION 5.1 for charging instructions.
STEP 1. Press the power button to turn on the
hoverboard.
STEP 2. The hoverboard will enter self-balancing mode.
Step on one pedal then quickly step on the
second pedal with your other foot.
STEP 3. Stand upright but relaxed and lean slightly in
the direction you want to go. Do not make any
sudden or jerky movements.
If the hoverboard doesn’t seem to work, make sure your feet are centered on the pedals.
• Do not ride sideways across slopes.
• If the T580 Twist does not start self-balancing automatically, the system indicator may light up and/or flash to indicate an
error. DO NOT operate the T580 Twist under these conditions. Turn the hoverboard off and back on again. If this fails to
resolve the issue, re-calibrate the hoverboard by following the instructions in
SECTION 3.3.
Power Button
Pedal