User Manual

ENGLISHSWAGTRON EB-8 20" Electric Bike

2.2 Unfolding the Frame

Unfold the rear wheel / section and hold your e-bike upright with

the kickstand. Push the latch closed so that it's parallel with the

bike's frame then turn the latch lock down towards the latch to

lock it in place (g.4).

2.3 Adjusting the Seat Height

For better pedaling, safety, and overall comfort, positioning the seat at the right height is key.

The rider’s leg length is used to determine the seat’s position. During pedaling, your hips should

remain level while your legs shouldn’t suffer strain from over-extension. To determine the right

seat height, sit on the e-bike with one pedal at its lowest point and place the ball of your foot on

the pedal. If your knee bends slightly at this position, the seat is at the right height. Additionally,

when placing your heel on the pedal, your leg should be nearly straight.

First, open the clamp under the seat post. Pull the seat up or push it down to

adjust height. Check to make sure the seat post is fully inserted into the frame

and the head of the seat is parallel with the frame. Lastly, close the clamp to

secure the seat in place (g. 5).

g.5

Clamp

g. 4

Latch

Latch Lock