User Manual

10
ENGLISH SWAGTRON EB10 Electric Bike
Section 3. How to Use the Battery
3.1 Charging Instructions
Charge the eBike before using it.
Step 1. Make sure the bike is turned off and connect the charger’s cables and adapter if needed.
Step 2. Locate the charging port at the bottom of the battery. Plug the charger into a wall outlet (100V-240V) then plug the other
end into the charging port. Remove the cap as needed.
Step 3. Allow 4.5~5 hours time for charging. The charging adapter’s light will turn red during charging and then green once
charging is complete. Disconnect all cables once charging is nished.
Charging Port
• Fully charge the battery before your rst use, this may take up to 5 hours.
• Perform periodic visual inspection of the battery ports and charging cables.