User Manual

ENGLISH SWAGTRON EB10 Electric Bike

Section 2. Assembling Your eBike

If you do not feel comfortable assembling the bike yourself, we recommend taking your

new bike to a bike shop for assembly and inspection. If you are comfortable assembling

the bike yourself, be sure to follow all instructions, properly adjust gears and brakes,

and set tire pressure. Proper tire pressure can reduce ats and improve the EB10's

performance, including range per charge.

Visit www.swagtron.com/faq for additional help with assembly, including a step-by-step

video walk-through.

2.1 Assembling the Front Wheel and Fender

You might need to ask someone to assist with initial assembly. (For an alternative way to

assemble the EB10, visit www.swagtron.com/faq.)

Assembling the front wheel consists of two parts: the fender and the wheel itself.

Step 1. Remove the nut, washers and bolt at the top of the front fork. Then remove the

screws at the lower fender stays. (Fig.1)

Step 2. Slide the fender through the fork. Reattach the bolt, washers and nut (in that

order). Reattach the lower fender screws.

Step 3. Line up the fork with the axle at the center of the wheel. Make sure there’s a

spacer between the fork and wheel on each side.

Step 4. Hold the nut on one side and tighten the nut on the other side of the wheel

onto the fork. (Fig. 2)

Fig. 2

Front Wheel

Front Fork

Front Brake

Nut

Front Fender

Head Stem

Fender Stays

Screws

Screw

Tab

Fig. 1