User's Manual
Please click and input the Username and Password if you have an Android
Market Account.
Please click
and input the First name, Last name and User name to create a new
account if you do not have an Android Market Account.
5. Firmware Upgrade
Insert the Driver CD and copy the file n amed “RK2918 Android Upgrade Tool_” to
your computer desktop (Note: The device can not be updated directly from CD) then
Open file “RKBatchTool.exe” in Folder “RK2918 Android Upgrade”, click the button
in this current window and choose “update.img” from the p opup window, click
open, as shown in the picture below:
Hold the “RESET” button without releasing after device has been turned off; connect
the device to the PC(you can only connect the device with PC through ‘USB’ port , you
can’t use ‘Host1’ or ‘Host2’ port to connect it with PC) by the USB cable supplied with
the device. The “Found New Hardware Wizard” window will pop up on the bottom
right corner as shown below.
Choose “Install from a list or spec ific location (Advanced)”, and then click “Next” to
install the USB driver, see the picture below:
NOTE: The USB port of the PC must be USB2.0, or it cannot be used to update the
device.