User's Manual

Click “Ethernet Settings” in the Wireless & Network Setti ngs Interface to enter the
following menu, then select the tick behind the “Ethernet”.
If the R outer assigns t he IP address automatically, the system will connect to the
network automatically; if the IP address is assigned statically, please select “Use static
IP”, then set the correct IP address to connect the network.
4.4.2 Notification
Click “Notification” in the Setting Interface to enter the following menu, you c an
check the working situation of the device as below:
4.4.3 Display Settings
Click “Display” in the Setting Interface to enter the following menu: