User's Manual
Click the
on the top right corner of display and click “Save” to finish Setting, see
picture showed as below:
Click the WiFi network name to complete the setting. For example: click “KW”, then it
will have an interface asking you to input the code, input the right code, and then click
“finish”. Then the system will be connected and will distribute the IP address
automatically, it wil l show “ connected” once the system has com pleted connecting.
You can see the network connecting status accordingly when you click the network
name. There will be a WiFi signal icon
in the desktop.
4.4.1.3 Ethernet Network Connection
Connect the network cable when the WiFi is turned off. The icon
in the top right
corner of the interface will become
showed as below: