User's Manual

-8-
you need to input the PIN each time when you power on your mobile
phone. The SIM card will be locked if you input wrong PIN code for three
times.
Unlocking methods as follows:
-Input the correct PUK according to the screen tips to unlock the SIM
card.
-Then input the new PIN and press the OK key.
-Input the new PIN again and then press the OK key.
-If the input PUK is correct, the SIM card will be unlocked and the PIN
will be reset.
Note: The SIM card will be locked if you input wrong PIN code for three
times. To unlock the SIM card, you need to input the PUK. In general, the
PUK can be obtained from the network operator.
 PUK
The PUK code (Personal Unlocking Key, 8 digits) is required to change a
blocked PIN. It is supplied with SIM card. If not, contact your network
operator. If you input wrong PUK code for 10 times, SIM card will be
invalid. Please contact the network operator to replace the SIM card.
 Barring code
A barring code is required for setting the call barring function. You can
obtain this code from the network operator to set the call barring function.
3.2 Installing T-Flash Card
The T-Flash card is a pluggable mobile storage card inside the mobile
phone.
To install the T-Flash card, open its latch, place its indented side
downward, insert the card into the card slot, and then close the latch.
To remove the T-flash card, open its latch and slightly press the card
inward. The card will automatically pop out. Close the latch.
Note:
1. The mobile phone cannot automatically identify the T-flash card being
inserted when the mobile phone is powered on. You must power off the
mobile phone and then power it on, so that the phone can identify the
T-Flash card.
2. The T-Flash card is a miniature object. Keep it out of the reach of