User's Manual

-7-
messages data.
Note:
After powering off your mobile phone, wait for a few seconds before
removing or inserting an SIM card.
Exercise caution when operating an SIM card, as friction or bending will
damage the SIM card.
Properly keep the mobile phone and its fittings such as the SIM cards
beyond children's reach.
Installation
 Hold the End key for a while to power off the mobile phone
 Push the back cover above the battery and remove it.
 Pull the left battery buckle outward and then lift the battery away.
 Insert the SIM card into the SIM card slot lightly with the corner
cutting of the card aligning to the notch of the slot and the gold plate of the
card facing download, till the SIM card cannot be further pushed in.
 Aim the positive pole and negative pole of the battery at the battery
connector of the mobile phone, and press the left of the battery to install
the battery into the battery tank.
Using code
The mobile phone and the SIM cards support sorts of passwords, in order
to prevent the phone and the SIM cards from being misused. When you are
prompted to input any of the codes mentioned below, just input the correct
code and then press the OK key. If you input a wrong code, press the Right
soft key to clear it and then input the correct code.
 Phone lock code
The phone lock code may be set to prevent your mobile phone from being
misused. In general, this code is provided along with the mobile phone by
the manufacturer. The initial phone lock code is set to 1234 by the
manufacturer. If the phone lock code is set, you need to input the phone
lock code when powering on the mobile phone.
 PIN
The PIN (Personal identification number, 4 to 8 digits) code prevents your
SIM card from being used by unauthorized people. In general, the PIN is
supplied with SIM card by the network operator. If PIN check is enabled,