User's Manual

-21-
type.
 Language: Select the display language for the mobile phone.
 Schedule power on/off: Set the time when the mobile phone will be
automatically powered on or off.
Alert: Before entering an area where the use of mobile phones is forbidden,
make sure that the scheduled power-on function is deactivated to avoid
accidents.
 Power management: Show the remaining battery level.
Display
Select images and set them as wallpaper and idle display. You can set
duration of backlight and keypad light.
Security Settings
This function provides you with related settings about safety use. To set
the SIM1 lock, you need to input the PIN. You can set the SIM lock only
after inputting the correct PIN. If you set SIM1 lock to on, you need to
input the PIN each time you power on the mobile phone. In the case you
input a wrong PIN for three consecutive times, you need to input the PIN
Unblocking Key (PUK). The PUK is used to unlock and change the locked
PIN. To obtain the PUK, contact the network operator. Fixed dial requires
the SIM card's support and the network operator's support. When the fixed
dial function is activated, you can dial only the numbers in the fixed dial
list. To activate the fixed dial function, you need to input the PIN2. Barred
dial requires SIM card’s support, you can activate or deactivate barring of
some or all calls. Phone lock enables you to lock/unlock the phone. Input
password to switch on or off the phone. Password is required when the
phone is locked. The password is 4 to 8 digits. Keypad lock enables you to
lock/unlock the keypad. Setting the auto locking time that 5s, 30s, 1 min
or 5 min is available. The keypad will be auto locked with no operation
during the period.
Restore factory settings
Choose Phone Settings > Restore settings to restore the factory settings.
Input the phone lock code and then select OK or press the Left soft key.
Note: The initial phone lock code is 1234.