User's Manual

-20-
registered.
 Divert calls: This network function enables you to forward incoming
calls to another number you have previously specified.
 Restrict calls
Call barring function enables you to bar calls as needed. When setting this
function, you need to use a network barring code, which can be obtained
from the network operator. If the code is wrong, an error message will be
prompted on the screen. After selecting a call barring option, continue to
select Activate or Deactivate. The mobile phone will prompt you to input
the call barring code and then contact the network. A moment later, the
network will make a response and send the operation results to the mobile
phone.
 Call waiting
¾ Activate: After you choose Activate, the mobile phone will contact the
network. A moment later, the network will make a response and send a
message to acknowledge your operation. If the call waiting function is
activated, the network will alert you and the mobile phone screen will
display the incoming call number if others are calling you while you are
already in a conversation.
¾ Deactivate: If you choose Deactivate, the network will not alert you
when others are calling you while you are already in a conversation.
¾ Check status: Query the network to obtain the current call waiting
status.
 Hide ID: When you call someone, he or she can’t find out your
number if you enable this function.
 Line selection: Switch to Line 1 or Line 2. By default, Line 1 is used.
Note: If you choose Line 2, dialing may fail. This depends on the
implementation of the network operator.
 Flight mode: You can’t communicate with others under this mode.
Some menus are unreachable under this mode.
 Others: It includes IP shortcut key, 50 seconds voice tone, connect
prompt, answer/reject mode and auto redial.
Phone Settings
 Time and date: Set time, date, time format and date display